Your shopping cart is empty.

Tips and Solutions

  • May 25, 2018
  • Sanna Li

How to Turn off your Lights without Leaving your Lovely Warm Bed in the Winter?

How to Turn off your Lights without Leaving your Lovely Warm Bed in the Winter? We all know the struggles of winter and cold nights. When the time comes to hopping into your warm bed, the distance to the light switch seems ever so far. No one likes to get up from bed to turn off the lights before going...

  • March 02, 2018
  • Sanna Li

5 Ways to Bring More Natural Light into your Home

Maximising the amount of natural light in your home is one of the key design aspects to consider when remodelling/building a new house. The benefits of natural light are substantial. Not only does it help to improve your mood and health, it also helps you save on electricity costs, and creates an illusion of a larger space, which will increase...

  • February 23, 2018
  • Sanna Li

Colour Temperature: What is it and what colour temperature is right for me?

Most white light is not pure white - it is actually tinted a little. Colour Temperature, or Correlated Colour Temperature (CCT) refers to the colour tint of a white light. Measured in the unit Kelvin (K), the spectrum of CCT indicates the many different shades of white light. In the LED world, there are commonly 3 main colour temperature groups:...

  • March 31, 2017
  • Sanna Li

Left over LED Strip? How to solder a new tail or plug

What happens when you've cut your LED strip and have some left over? With some soldering, the extra piece/s can also be utilised. Soldering a new tail or plug: You will need: Soldering iron Solder Wire stripper 22AWG wire (recommend for short lengths e.g <5m) OR 18AWG wire (recommended for long lengths e.g >10m)    1.Secure your LED strip using...

  • March 22, 2017
  • Sanna Li

How to cut Aluminium Extrusion & Diffuser

Each of our extrusions come in 2m lengths, and sometimes a length customisation is required. You may need to cut your extrusion to the correct length for your application. Below is a step by step guide on how to correctly cut your extrusions. There are two different types of diffusers, which can be cut in different ways: Click on type:...

Instagram Updates