Yes, you can. An RGBW controller has 4 channels, each labelled 'R', 'G', 'B', and 'W' respectively.
You can connect the warm white strip to the 'W' channel and the RGB strip to the other 3 channels. If you do not wish to purchase a RGBW strip, you can place an RGB strip and warm white strip into the same extrusion, one on each side. Remember, you will need a wider extrusion to fit both LED strips. This will create a similar effect to having a RGBW LED strip.
- March 09, 2018
- Sanna Li